Circular knitting machines for sportswear

Sportswear fabric knitted on a circular knitting machine

Applications

Circular knitting machines for sportswear

Machines for tops, sports pants, shorts, socks, swimwear and tights — fabrics that have to hold shape through washing and stretch without grin-through.

Recommended machine types

What to put on the floor

These are the machine types we normally quote for sportswear. Tell us the fabric weight and expected output and we narrow it to one configuration.

Machine names follow our catalogue naming. Not every model is stocked for every market — availability is confirmed with the quotation.

What it produces

Tops

Sports pants

Shorts

Socks

Swimwear

Tights

SPECIFICATION

Fabric weight and stretch decide the configuration

Sportswear is sold on recovery, not on appearance. Two fabrics of the same weight behave differently if the elastane is plated at a different tension, so the machine is specified from the fabric construction back to the cylinder rather than the other way round.

StructureTypical GSMGaugeDiameterFeedsElastane
Single jersey, tops120–180E24–E3230″–34″72–960% or plated 5–8%
Single jersey, leggings180–240E28–E3230″–34″72–96plated 10–18%
Three-thread fleece240–320E20–E2430″–34″48–72optional in fleece yarn
Interlock180–240E24–E2830″–34″72–840–10%
Rib, cuffs and waistbands260–380E14–E1830″–34″36–54plated 8–15%

Teamwear and club ranges usually add a fourth decision: colour changes per roll. A four- or six-colour auto-striper costs more than a plain single jersey cylinder but removes the changeover time that a jacquard machine would otherwise absorb.

SPECIFICATION

Four sportswear faults that trace back to the order sheet

  • Grin-through after the first wash. Elastane plated too loose passes behind the face yarn once the fabric relaxes. Specify plating tension and a wash test on the sample roll, not a flat measurement on the greige.
  • Growth in the leg or sleeve. Recovery, not stretch, is the failing property. Ask for a cyclic extension test on the finished fabric; a fabric that recovers within 5% at the agreed extension is the acceptance criterion.
  • Needle lines in fine-gauge jersey. Elastane fibres abrade the latch if the needle is not matched to the yarn path. Fine-gauge elastane work needs a needle with the right latch clearance, not simply the cheapest needle in the size.
  • Heat-set shade shift. Polyester sports fabric is often set after knitting. If the setting temperature is not written into the order, two suppliers can knit identical greige and deliver different finished shades.

QUALITY

Tests to agree before the machine ships

Write the test method and the acceptance limit into the purchase order. Vague references to “international standard” are not enforceable when a roll is rejected at the buyer’s lab.

  • Dimensional change after washing — ISO 6330 procedure, ISO 5077 measurement, typically within ±5% for cotton-rich jersey.
  • Bursting strength — ASTM D3786, relevant for lightweight single jersey and swimwear.
  • Pilling and surface change — ISO 12945-2, typically grade 3–4 minimum for a brushed or fleece face.
  • Colour fastness to washing and to perspiration — ISO 105-C06 and ISO 105-E04, usually grade 4 minimum for next-to-skin sportswear.
  • Elastane content and recovery — record the method your buyer uses, because plating percentage is not the same as finished fabric content.

For the fabric-side diagnosis when a roll fails, the fabric defect guide separates needle, yarn and tension causes by defect direction.

FAQ

Questions buyers ask about sportswear

Which circular knitting machine is used for sportswear?

The usual starting points are Single Jersey, Single Reverse Plated Loop, Single Three-Thread Fleece. The final choice depends on fabric weight, required stretch and the gauge you sell, so we confirm the configuration against a fabric sample rather than a catalogue page.

What do you need from us to quote a machine for sportswear?

Fabric type and weight, required gauge and cylinder diameter, expected output per shift, and the destination port. With those we return a configuration sheet with price and lead time.

What is the lead time and warranty?

Machines are built in 20–45 working days depending on model and configuration, then 20–45 days by sea freight. Machines carry a 12-month warranty from delivery; needles and spare parts follow the period stated on the invoice.

Can one machine cover both tops and leggings?

Usually yes, within a gauge step. A 30-inch, E28–E30 machine with 96 feeds will run a 150 gsm top and a 220 gsm legging fabric, but the elastane plating device and the take-down setting have to change between them. If leggings are more than half your volume, specify the machine for the heavier fabric and accept slower running on tops.

How much elastane does sportswear normally carry?

Tops and T-shirts usually run 0% to 8% plated. Leggings, swimwear and compression garments run 10–20%. The number that matters is the finished fabric content after processing, which differs from the plating ratio because of relaxation and finishing.

Do I need a jacquard machine for teamwear?

Only if the design is a knitted-in pattern. Club stripes and panel colour blocks are normally produced with a four- or six-colour auto-striper, which is cheaper to buy and faster to change over than a jacquard cylinder.

ES